PED's range of Bio-medical watse Incinerators are designed for safe and economical disposal of human and /or animal waste generated by hospitals,clinics,nursing homes,veterinary institutes and research/industrial laboratories.The Incinerator is specially designed for the safe disposal of bio-medical waste with 85% moisture content for the categories mentioned in the Gazette of India published by Authority in July 27,1998 and subsequent amendment and Central Pollution Control Board guidelines. The Incinerators are fuel fired )gas or oil( systems and their platforms are designed according to capacity. 10-100 kg/hr range uses rectangular platform, the 100-250 kg/hr range uses the cylindrical platform and range for over 250 kg/hr uses rotary kiln platform.

Construction features:

• Shaped refractory (precast 46% alumina castables)
• Isolation plates protect the burners from radiation heat when not firing, resulting in long life for sophisticated components of burner control.
• Pre-assembled unit
• Two separate high-pressure jet oil fired burners for primary and secondary chambers.
• PLC auto control.
• Three separate thermocouples with stainless steel sheathing for accurate temperature measurement.
• High quality surface preparation before heat and corrosion resistant paint is applied.
• In-built high grade refractory ventury panels to arrest ash particles within the primary chamber which also creates turbulence.
• Controlled combustion air supply for gasification.
• Effective pollution control device.

• Industrial / Hazardous Waste Management Systems as per CPCB norms.
• Solid Hazardous Waste Incinerator, complete with material handling and feeding system, microprocessor controlled incineration, waste heat recovery system, multi stage gas cleaning system.
• Liquid Waste Incinerator, complete with air/steam assisted liquid atomization system, microprocessor controlled incineration, waste heat recovery system, multi stage gas cleaning system.
• Solid / Liquid Waste Incinerator, complete with air/steam assisted liquid atomization system, microprocessor controlled incineration, waste heat recovery system, multi stage gas cleaning system.
• Gas Incinerator, complete with preheater / heat recuperator, microprocessor controlled incineration, waste heat recovery system, multi stage gas cleaning system.

Basic functions of water treatment include sedimentation, filtration and disinfection. Some of the general systems and their applications are as follows :
Media Filtration System - Using Pressure Sand filter, Multi grade filter, Activated carbon filter
Softening Plants - Using Strong acid action exchange resins.
Demineralisation Plant - Using ion exchange resins capable of removing all dissolved
minerals/ impurities.
Membrane Technology - Using Reverse osmosis, Micro filtration, Ultra filtration.
This system is based on the technology of membrane cross-flow filtration process.

Industrial Waste Water Treatment:

Basic functions of waste water treatment is the same as water treatment up to the primary stage but different from the secondary stage. In water treatment we conclude the process with destroying the bacteria, but in waste water treatment we use, promote and process with the bacteria.
Two types of treatment available:
Aerobic treatment - Aerobic bacteria is promoted by incorporation of atmospheric oxygen.
Anaerobic treatment - Where bacteria is developed in the absence of sunlight and oxygen.
Target Industries - Customers in the Pharmaceutical, Dairy & Sugar Sectors